cdrtfe Homepage

Changes - cdrtfe 1.5.8

release date: 01.01.2018

• cdrtools updated to version 3.02a09
• GUI, dialog for selecting multiple writers: CTRL-A selects all available writers.

Changes - cdrtfe 1.5.7

release date: 01.05.2017

• DAE: Adds progress bar (per track).
• Audio CD: Start writing process only if a CD-R(W) is inserted.
• Disk Image
  
  • Fixed 'Invalid handle' error when verifying ISO images by avoiding a sharing violation.
  • Check ISO volume size before staring verification. If the volume size is smaller than the ISO image size, then limit the verification to the volume.
  • Allow raw writing mode for CUE images.

Changes - cdrtfe 1.5.6

release date: 15.09.2016

• More adjustments for cygwin 1.7 and above.
• Ask the user what to do if a disc could not be recognized.
• (Un-)Installer now warns if a running instance of cdrtfe is detected.
• Bugfix:
  
  • Some BD-R(E) and BD/DL discs weren't recognized correctly.

Changes - cdrtfe 1.5.5

release date: 28.02.2016

• GUI:
  
  • Support for dpi awareness.
  • Only use system icons in tree- and listviews.
  • Removed old and unused icons.
  • New icons for buttons.
  • Several options which could be set with the cdrtfe.ini are now available via the GUI.
• DAE:
  
  • Support for LibParanoia options.
• Disk image:
  
  • Added 'multisession' option for writing images.
• Activate DEP and ASLR.
• Bugfix:
  
  • Changing the language in portable mode did not save this setting to the cdrtfe.ini in the program folder of the portable version. Instead the cdrtfe.ini in the user directory was used, if it existed.
  • When no cdrtfe.ini existed, the language setting was saved to the cdrtfe_lang.ini. In most cases a user doesn't have the privileges to do this. Now a new cdrtfe.ini will be created.
  • Added the cdrtools folder to the search path, so that the code pages can be found by mkisofs.

Changes - cdrtfe 1.5.4.1

release date: 10.10.2015

• Bugfix:
  
  • A variable was incorrectly initialized, which could prevent the start of the 'Disc image' project.

Changes - cdrtfe 1.5.4

release date: 08.08.2015

• GUI:
  
  • The drive selection now shows the drive letter for each drive.
  • Holding the Shift key during the start of cdrtfe activates the debug mode.
  • Prevent the message 'Invalid Handle' during disc verification with multiple retries. Clarify the error message.
• Audio CD:
  
  • New option in cdrtfe.ini for a less strict format checking of sound files (only flac): section [Audio-CD], RelaxedFormatChecking = 1. This makes it possible to add source files which are not in Audio CD format when using user-defined commandlines (e.g. with ffmpeg) for audio decoding.
• Bugfix:
  
  • Audio CD: Tracks with identical filenames from different source folders caused problems because of name collisions of temporary files during conversion into wav format.

Changes - cdrtfe 1.5.3

release date: 02.08.2014

• Bugfix:
  
  • Commandline option /img can now be used together with /load.
  • The exe installer can now handle a locked ShellExtension DLL when reinstalling, updating and uninstalling cdrtfe.
  • Correctly handle program paths when writing them to the registry.
  • Fix rare access violation when initializing file explorer.

Changes - cdrtfe 1.5.2

release date: 01.03.2014

• GUI:
  
  • Corrected position of some controls.
  • Use bigger font size.
  • Use Vista style tree views, if possible.
• Automatic disc type detection:
  
  • This feature can be activated via cdrtfe.ini by adding the line
    DetectDiskType=1
    to the section [General].
  • When a disc is inserted into the selected drive, cdrtfe will detect the size and type of the disc and set the space meter of the currently active project accordingly.
  • If the current project is 'Data disc', no files have been added yet and the options 'Multisession' and 'Import previous sessions' are enabled, the contents of the disc will be imported into the project and the space meter will show the space used by the previous session.
  • Ctrl-F5 forces a new detection of the disc.
• Automatic TOC detection for project DAE:
  
  • This feature can be activated via cdrtfe.ini by adding the line
    DAEAutoReadToc=1
    to the section [General].
  • If the current project is 'DAE' and the inserted disc is an Audio CD, the TOC will automatically be read and the track list will be displayed.
• Commandline for decoding sound files can be changed via cdrtfe.ini or project file, section [Audio-CD].
  
  • Add a line starting with
    CustomConvCmdMP3=
    CustomConvCmdOgg=
    CustomConvCmdFLAC=
    CustomConvCmdApe=
    and followed by the appropriate commandline. Example:
    CustomConvCmdOgg=c:\Programme\cdrtfe\tools\sound\oggdec.exe --quiet -b16 -o %T %S
  • %T and %S are placeholders for target and source filename.

Changes - cdrtfe 1.5.1

release date: 01.09.2013

• GUI:
  
  • Changed appearance of the message dialogs.
  • Use Segoe UI or Tahoma as font if available.
  • Corrected tab order on the cdrtfe main window.
• Bugfix:
  
  • Drive recognition failed with more than 10 SCSI host adapters.
  • Under Windows 7 PE the initialization of the task bar progress indicator failed and caused cdrtfe to crash.
  • Continuing a multisession CD with importing the previous session could make both sessions (the old and new) unusable. The mkisofs command to calculate the amount of data to be written was called with wrong parameters.
  • Registering and unregistering the ShellExtension failed on Windows x64.
• Make cdrtfe compile with Delphi 7 again.
• Use current versions of JCL, JVCL, Vampyre Imaging Library and Drag and Drop Component Suite.
• Added possibility to compile cdrtfe with the Virtual Shell Tools instead of the Delphi Shell Controls.

Changes - cdrtfe 1.5

release date: 01.09.2012

• Detect the cygwin path prefix with an external cygwin program. This should work with all cygwin versions from 1.5.x to 1.7.x.
• Projects 'Audio CD' and 'Disc image' can now simultaneously write to multiple burners.
  
  1. Go to the project 'Audio CD' and add the audio tracks or go to the project 'Disc image' and select the image file (ISO, CUE/BIN image or audio CUE sheet).
  2. If cdrtfe detects at least two disc writers, you can select 'multiple writers' from the drop down list as target.
  3. Click 'Start'.
  4. Select the writers you want to use. Then cklick 'Ok'.
  5. Click 'Start'. The Tabsheets 'Device <x>' show the log for each writer, the Tabsheet 'Preparation' shows the log when compressed audio files need to be converted into wav format.
  
  Temporary files will be kept until you close this window, so you can repeat the writing process several times without creating the temporay files again.
  
  Currently, there is no verification for multiple discs after the writing process finished. You may, however, start the verification manually for a single drive. Right-click the 'Verify' option.
  
  It is recommended to run tests in simulation mode or with simulation drivers before starting a real write.

Changes - cdrtfe 1.4.1

release date: 01.02.2012

• GUI:
  
  • Selected task can be started with Ctrl-Alt-Enter.
  • Optional warning before closing cdrtfe, if the file compilation has been modified.
  • Workaround for the message dialogs to enable the screenreader NVDA to read the text.
• Audio CD:
  
  • Only sound files which can be converted to Audio CD compatible wave files will be accepted:
    wav, flac, ape: 44.1 kHz, 16 Bit, stereo
    ogg           : 44.1 kHz, 8 oder 16 bit, stereo
    mp3           : any
    
  • Missing values for userdefined pauses will be interpreted as 0 seconds. Additional check for invalid values.
• ShellExtension:
  
  • It is no longer required to start cdrtfe with admin privileges to (de)activate the ShellExtension under Vista/Win7. Required privileges will be requested, when needed.
  • When in portable mode cdrtfe does not allow any longer to activate the ShellExtension.
• Bugfixes:
  
  • When starting cdrtfe the FileExplorer wasn't opened in the specified folder.
  • Current folder in the FileExplorer changed when tab was switched.
  • Continuing a multisession CD could make the disc unusable, if files from the previous session were to be hidden and no UDF filesystem was used.
  • The old version of files from previous sessions which should be replaced were additionally hidden, which caused mkisofs to fail.

Changes - cdrtfe 1.4

release date: 01.11.2011

• GUI:
  
  • Added toolbar
  • bigger main window, more space for the project area
  • FileExplorer now located within the project area
  • Toggle output window (Alt-K)
  • Toggle output window and FileExplorer (Alt-J)
  • Access disc info and erase functions via menu
  • Close output window with Alt-L
  • Spacemeter shows selected disc type.
• Portable mode:
  
  • Delete registry keys 'HKLM\Software\Cygnus Solutions' and 'HKCU\Software\Cygnus Solutions', if they did not exist at startup.
  • Indicate portable mode in splash screen and about box.
  • Change search order for cdrtfe.ini. Look first in cdrtfe's program folder. This allows to use both the portable and installed version on one system.
• Driver options:
  
  • Support for Yamaha Audiomaster feature: cdrtfe.ini (or project file), section [cdrecord], Audiomaster=1
  • Support for additional cdrecord driver options: cdrtfe.ini (or project file), section [cdrecord], CustDriverOpts=...
• First (still untested and incomplete) support for BD discs
• Audio CD:
  
  • Convert mp3 files to wav using mpg123 instead of madplay
  • Possibility to sort the tracks by filename
• CD info:
  
  • Show meta data (isoinfo -d -debug)
• CD Image:
  
  • Check medium type before writing image to disc.
• Workarounds for the Windows DLL (binary planting) vulnerability
• Bugfixes:
  
  • SCSI interface setting (ASPI, SPTI, auto) was ignored during driveletter recognotion.
  • Pathnames with '=' weren't handled correctly
  • Workaround for problems when running cdrtfe with BB4win/BBLean.
  • Debug DLL: Catch possible exception when auto-saving log file and allow selection of alternative path. In portable mode log file will be saved to program folder.
  • DAE: Hidden audio track could cause wrong track numbering when saving to a compressed format.
  • DAE: Freedb information could lead to invalid filenames.
  • Relative paths can now be used in CUE sheets for compressed audio files.
  • Sometimes temporary CUE sheets were not deleted.

Changes - cdrtfe 1.3.9

release date: 01.09.2010

• Shell Extension for 64 bit Windows.
• Bugfixes:
  
  • Filebrowser caused an access violation when there was no drive c:\.
  • Empty disc labels caused wrong error message (Invalid source file ":").

Changes - cdrtfe 1.3.8.1

release date: 01.08.2010

• GUI:
  
  • Paste files via context menu into cdrtfe.
  • Allow FIFO buffer size up to 128 MiB.
• CD Image:
  
  • Support readcd option retries=#.
• Bugfixes:
  
  • Commandline options were completely ignored.
  • Disc labels were ignored when loading project files.
  • Button captions of the message dialogs weren't translatetd.

Changes - cdrtfe 1.3.8

release date: 05.07.2010

• GUI:
  
  • Allow copy&paste via Ctrl-V from Explorer to cdrtfe (in treeview and listview).
  • Progress display for mkisofs and readcd with progressbar.
  • Use standard system symbls for folders in treeview.
  • Improved message dialogs.
• Bugfixes:
  
  • Fixed possible Access Violation when closing cdrtfe.
  • Fixed Access Violation that occurred at startup when the execution of cdrecord/mkisofs failed.
  • After writing a Cue image all controls remained locked.
  • Under certain conditions the verification of a disc did not start.

Changes - cdrtfe 1.3.7

release date: 01.05.2010

• Audio CD:
  
  • CD Text from tags: Workaround for UTF-8 coded tags.
  • Show number of available characters for CD Text.
  • Mark too long (>159 characters) CD Text strings.
  • Keyboard shortcuts (Dialog 'Tracks'):
    F4   Performer from current row as album performer
    Shift-F5   Delete performer for all tracks
  • Support for WaveGain.exe (normalize tracks before writing).
• DAE:
  
  • Hidden tracks can be read an copied.
• CD Image:
  
  • Verification of ISO images with disc.
• GUI:
  
  • Windows 7: progress display in taskbar entry.
  • Activity display when deleting RWs and fixating discs.
  • FilexExplorer settings can be saved.
  • Keyboard-Shortcut (Alt-Q) for fast switching between FileExplorer and project.
  • The cdrtfe.ini can be directly displayed and edited.
• Recognize active cygwin1.dll and use it (if possible).
• Improved execution of commandline tools (timeout, abort).
• Bugfixes:
  
  • Audio-CD:
    
    • FLAC file with ID3 tags will not cause access violations any longer.
    • Check CD Text data only when CD Text option is set.
  • DAE: Track information (title, performer) were not displayed, if one of the fields was empty.

Changes - cdrtfe 1.3.6

release date: 01.12.2009

• Data CD:
  
  • Warn, when trying to write a multisession CD in DAO mode.
• Audio CD/(S)VCD:
  When adding multiple tracks these are alphabetically sorted first.
• GUI:
  
  • Show subfolder sizes in file view.
  • cdrtfe now has a file explorer to show and select source files (only possible if main program window has a sufficient height).
  • Added keyboard shortcuts:
    Alt-E   File Explorer
    Alt-L   Output/Log window
    Alt-S   Settings dialog
  • Changed appearance of some dialogs.
  • Improved progress display (track/file and total).
  • New program icon.
• Better drive lettter detection of drives connected via USB.
• Bugfixes:
  
  • Audio CD:
    
    • Option 'overburn' now works.
    • BOM (Byte order marks) are removed from tags.
    • Loading a FLAC file could overwrite memory areas and crash cdrtfe.
  • XCDs: Form2-Files were ignored when calculating the total size.
  • DAE: With the option 'prefix file names' ID3 tags were not written.
  • A wrong drive index could cause a access violation after loading a project file.

Changes - cdrtfe 1.3.5

release date: 01.04.2009

• Data CD:
  
  • Warn, if Vol-ID is too long.
  • Warn, if Meta Data entries are too long.
  • Allow to write multisession discs wihtout Rock-Ridge filesystem. Setting via cdrtfe.ini: ForceMSRR=0 in [Data-CD]
• Audio CD:
  m3u playlists can now have relative paths.
• DAE:
  
  • Set reading and writing speed seperately for 1:1 copy.
  • Warn, if reading the TOC failed.
• GUI:
  
  • Improved keyboard navigation with Tab/Shift-Tab in many dialogs.
  • Files in the Audio CD/(S)VCD project can now be opened with Enter.
  • The Taskbar entry can show the number and the size of the files of a project (Data CD, Audio CD, XCD). Settings via cdrtfe.ini: FileInfoTitle=1 in [General]
  • Folder selection dialog can now be closed with Esc.
  • Context menu adjusted.
  • Column width of ListViews can now be saved.
  • SpaceMeter can be disabled. Setting via cdrtfe.ini: SpaceMeter=0 in [General]
• If calling ShellExecute fails, an error message is shown.
• Registering and unregistering the ShellExtension should now work on Windows Vista. Admin privileges are still necessary.
• Bugfixes:
  
  • Data CD, Meta Data: It wasn't possible to use just a single field.
  • DAE, 1:1 copy: Copy wasn't possible, if the path for the temporary files included spaces.

Changes - cdrtfe 1.3.4

release date: 02.01.2009

• DAE: Support for option -offset (via cdrtfe.ini, section [DAE], Offset=...).
• Minor GUI improvements.
• Bugfixes

Changes - cdrtfe 1.3.3

release date: 30.11.2008

• Data-DVD: Added multiborder DVD support (cdrecord 2.01.01a50 and newer) for DVD-R and DVD-RW. A DVD-RW which has been written in multiborder mode has to blanked fully to reuse it for another writing mode.
  Important:
  According to the cdrecord man page multiborder DVD writing is done in the same way like writing multisession CDs. So, cdrtfe has been adjusted to allow this for DVD-R(W) discs.
  However, I haven't been able to successfully continue a multiborder DVD, cdrecord always complained about not having enough space left regardless how much data was to be written.
  I am not sure what causes this problem (cdrecord, system, drive). If you want to use this new feature, try it with a rewritable disc first.
• Splashscreen can be disabled (Startoption /nosplash or cdrtfe.ini, Section [General] Nosplash=1).
• Show the remaining space in the status bar.
• Folders are now displayed in the file listview (Data CD, XCD).
• Added sliders to allow resizing of the folder treeviews and file listviews (Data CD, XCD).
• All dialogs for selecting files or folders now remenber the last selected folder.
• Bugfixes

Changes - cdrtfe 1.3.2

release date: 05.09.2008

• A 'space meter' has been added which displays the used space of a disc. The disc type can manually be selected.
• Multisession CDs: The session to be continued can now be selected, and the contents will be displayed in the file/folder view.
• DAE: The option -verboselevel=all will only be used for 1:1 copies.
• The CD image project now has a seperate option for CD text (when writing an Audio CD from a CUE Sheet).
• Files can be opened with the associated program. For sound and video files an alternative player can be defined.
• Bugfixes

Changes - cdrtfe 1.3.1

release date: 24.03.2008

• DVD+RWs can now be blanked, if cdrecord 2.01.01a37 or newer is available.
• cdrtfe can now detect some potential problems with cdrecord, mkisofs or the cygwin1.dll.
• The use of the included cygwin1.dll can now be forced, even if the DLL is found in the system's search path.
• New folder structure for the translations (cdrtfe and cdrtfe Shell Extension).
• New commandline options /debug and /debugAS to start cdrtfe in debug mode.
• Bugfixes

Changes - cdrtfe 1.3

release date: 29.12.2007

• Data CD:
  
  • Additional Meta data: Publisher, Preparer-ID, System-ID, Copyright-File.
  • Additional options: -T, -hide-joliet-trans-tbl, -no-limit-pathtables, -hide-rr-moved.
• Data CD, XCD:
  Improved folder selection dialog, which allows to choose multiple folders. Use Alt-Insert to add a folder to the list and Del to remove a folder from the list. A single folder can be selected just like before.
• CD Image:
  
  • The CD Text information from Audio CD cue sheets will be written to disc, if the CD Text option from the Audio CD project is enabled.
  • 1:1 copies can be created by using the function 'Create Image from CD' with the option 'Write copy' enabled.
• DAE:
  
  • 1:1 copy function: automatic extraction and burning of all tracks
  • If available the folder 'My Music' will be used to save the tracks.
• Bugfixes

Changes - cdrtfe 1.3pre2

release date: 29.07.2007

• Data CD, continue multisession CDs:
  
  • Show content of previous sessions in the file/folder view.
  • Import is possible if the options 'multisession' and 'continue CD' are selected and the project is empty.
  • Warnings that files and folders from previous sessions cannot be moved or renamed.
  • Possibility to 'delete' files or folders from an existing session.
  • Limitations:
    Empty folders from previous sessions cannot be removed.
• Data CD: New/changed options for filesystem:
  
  • output character set is now independent of ISO Level setting
  • new option for input character set
  • support for additional boot options: -boot-load-size, -boot-load-seg and -boot-info-table
• Audio CD:
  Support for source files in ape format (Monkey's Audio). The necessary commandline tool (mac.exe) can be downloaded from http://www.monkeysaudio.com/
• Audio CD: Cue sheet support:
  Audio CDs can now be created from cue sheets (*.cue). Use the project 'CD Image' and add the cue sheet file. Compressed audio files will be converted into wave format automatically.
• Auto-save on exit
• Automatical update of the second output window can now be switched off.
• context-sensitive help
• new commandline options /img und /dvd
• keyboard shortcuts
• Bugfixes

Changes - cdrtfe 1.3pre1

release date: 20.03.2007

• Data CD:
  New option to close a disc when appending a session.
• (S)VCD:
  Show length of MPEG files.
• If available, use the new cdrecord option -minfo to get information about disks.
• Reduce the startup time, especially under Windows XP.
• Main window can now stay on top of all other windows. Useful for drag-and-drop operations with the Windows Explorer. Use F12 to switch this function on or off.
• Possibility to reset all projects (menu Project -> Clear all).
• Improved error messages.
• New error/warning messages:
  No simulation with DVD+R(W) discs.
  DVD+RW discs cannot be erased.
  Warning, if user tries to close cdrtfe when a disc is still being written.
  Show details, if CreateProcess() fails.
• Better exception handling which gives detailed information.
• Bugfixes

Changes - cdrtfe 1.2

release date: 31.10.2006

• Audio CD:
  Support for m3u playlists.
• DAE:
  Userdefined audio compression.
• Option to erase a fixated CD/DVD-RW automatically.
• Option to detect the available writing speeds automatically.
• All icons and glyphs can be changed by the user. See section icons.
• Full support for XP themes.

Changes - cdrtfe 1.2pre2

release date: 30.06.2006

• Data CD:
  Improved error handling (e.g. insufficient capacity, multisession CDs, ...).
• Data CD, XCD:
  Improved drag and drop from Windows Explorer to cdrtfe.
• DAE:
  Create file names from CD text or freedb information.
  Direct conversion into mp3, Ogg Vorbis or FLAC (needs lame, oggenc und flac).
• Progress information in the taskbar entry.
• Portable mode
• Fixed a bug which caused an Access Violation when starting a second instance of cdrtfe. [03.07.2006]

Changes - cdrtfe 1.2pre1

release date: 26.02.2006

• Improved handling for DVD media which could not be recognized.
• Audio CD:
  CD text entries for title and performer can be generated automatically from the file name.
  FLAC files as source files (needs flac.exe).
• XCD:
  First support for the additional error protection with rrenc (needs rrenc.exe).

Changes - cdrtfe 1.1

release date: 25.10.2005 / 04.11.2005

• Data CD: Possibility to write empty folders and to reset file attributes (rational rock ridge)
• Audio CD: Ogg Vorbis files as source files.
• DVD Video: Volume-ID, writing with image file, verify.
• Default settings for temporary folder (%TEMP%) and image files (%TEMP%\image.iso).
• Possibility to eject disk automatically.
• Font Antialiasing under WinXP.
• Minor bugfix regarding window size with XP themes [04.11.2005].

Changes - cdrtfe 1.1pre6

release date: 01.08.2005

• Improved DVD support.

Changes - cdrtfe 1.1pre5

release date: 27.05.2005

• Audio CD: MP3 files as source files (needs madplay.exe).

Changes - cdrtfe 1.1pre4

release date: 17.04.2005

• Support for remote drives via RSCSI.
• First open source version of cdrtfe.

Changes - cdrtfe 1.1pre3

release date: 22.02.2005 / 11.03.2005

• Support for the Mingw32 version of the cdrtools.
• Verify function improved: bugs removed, verify for XCDs possible.
• Audio CD: more options (CD text, pause between tracks).
• File lists can be saved and loaded seperately from the settings.
• cygwin1.dll does not need to be in the program folder any longer.
• On-the-fly without sh.exe possible (Win2k, XP).
• CUE images can be written either with cdrecord or cdrdao.
• Options /minimize and /hide to run cdrtfe miminized or hidden.
• Find and link duplicate files to save space.
• Language can be changed at runtime.
• First, limited, experimental support for data and video DVDs.
• Create Video CDs with VCDImagern.
• XCD Info file for an easy extraction of the Form2 files with Mode2/Form2 File Extractor.

Changes - cdrtfe 1.0

release date: 31.05.2004 / 02.06.2004 / 23.06.2004 / 06.08.2004 / 10.09.2004 / 25.09.2004

• Parts of the GUI have been redesigned.
• Separate settings (e.g. writing mode, drive) for each task (Data CD, Audio CD, XCD, CD Image) possible.
• Support for some more cdrecord options: -tao (introduced with cdrecord 2.01a26), -v, driveropts=burnfree (Buffer underrun protection), FIFO buffer size, driver=cdr_simul (simulation driver for timing tests).
• Settings are saved to the file cdrtfe.ini instead of the registry.
• Display problem on systems with small fonts (<96 dpi) solved. File version: 1.0.0.1 [02.06.2004].
• cdrtfe now works on systems with a cygwin installation which does not use the default Cygwin Path Prefix /cygdrive. File version: 1.0.0.2 [23.06.2004].
• Spanish translation added. Thanks to Javier Pérez Montes! File version: 1.0.0.3 [06.08.2004].
• Fixed a bug which prevented the correct identification of the version number of cdrecord 2.01. File version: 1.0.0.4 [10.09.2004].
• Translations added. Thanks to Amus for the Polish and to Sylvie Charlois Lacour and Xavier Durieux for the French tranlsation. [25.09.2004]

Änderungen - ältere Versionen

cdrtfe 0.9.2 [20.02.2004] [13.03.2004]

• Create images of CDs with readcd
• Support for mkisofs option -udf
• Support for cdrecord raw mode: -raw96r, -raw96p, -raw16
• virtual CD devices are not longer recognized as CD writers
• Confirmation dialogs can be deactivated
• New cdrtfe_lang.ini. Supported languages: German, English, Russian (charset cp-1251). Thanks to Sergei Sarbash for the Russian translation. [13.03.2004]

cdrtfe 0.9.1 [14.01.2004]

• Verify: compare the source files with the files written to a CD (Data CD)
• Removed some bugs (e.g. wrong commandline when writing an image using the option 'overburn', conflicts when loading settings from registry and project file, ...)
• Improved the GUI a little
• When using an unknown drive cdrdao can be forced to use the driver generic-mmc or generic-mmc-raw.

cdrtfe 0.9b [07.12.2003]

• Behebt das Problem mit der Fehlermeldung "mkisofs: No such file or directory. Invalid node - ..." auf Systemen mit einer cygwin-Installation, bei der als "Default Text File Type" UNIX eingestellt ist. cdrtfe speichert die Pfadlisten fortan mit LF statt CR/LF als Zeilentrenner.

cdrtfe 0.9a [23.10.2003]

• Corrected version which can be used with big fonts (120 dpi).

cdrtfe 0.9 [28.09.2003]

• Creation of any directory structure you want (Data CD, XCD)
• Files and folders are shown in an explorer-like view (Data CD, XCD)
• Check for too long file and folder names and and directories which are nested too deep (Data CD)
• Multi language support: copy the file cdrtfe_lang.ini (8 KiByte, zip-archive, section 'Translations') to the directory where cdrtfe.exe is located. For more information see cdrtfe_lang.ini. Supported languages: German, English.

cdrtfe 0.8.1 [24.06.2003]

• Multi language support: copy the file cdrtfe_lang.ini (8 KiByte, zip-archive, section 'Translations') to the directory where cdrtfe.exe is located. For more information see cdrtfe_lang.ini. Supported languages: German, English, Spanish (Thanks to Enrique Fontano).
• Removed some small bugs
• Commandline options /exit and /log
• Improved error handling

cdrtfe 0.8 [12.05.2003]

• First released version of cdrtfe.